High Speed Homogenizer Lab Disperser Emulsifier 8000-22000rpm Speed Adjustable Disperser Emulsifier with Digital Display,5-1000ml,2 Working Heads

SpecificationMotor speed: 8000-22000 rpmRated power: 220WRated voltage: 110VRated frequency: 60HZAdjustment system: knobWorking head size:1212G: diameter 12mm, length 120mm1218G: diameter 18mm, length 120mmProcessing capacity: 5-1000mlWeight: 7KGSize: 27*17*40cmWorking mode: alternate 5 minutesWorking method: internal cutting toolContact material: stainless steel and polytetrafluoroethyleneNotes1. The instrument should be placed on the horizontal workbench surface, the installation of the required homogenizing tool must be in place, switch on the power test machine first with a cup or utensil with water, so that the plum cutter head submerged in water, turn on the power switch, slowly adjust the speed knob to fast, no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the tool 6M/M tightening screw, The external fixing sleeve is installed in place by random turning, and then tightened) before it can work.2. Cut the plants or microorganisms to be tested into small pieces or pieces, place them in the provided glassware, clamp them in the middle of the magnet bracket (figure 7), loosen the 8M/M tightening screw fixing the motor base, slowly align it with the mouth of the vessel and move it downward, so that the homogenizer head is 2-3mm away from the bottom of the vessel, and then tighten the 8M/M screw.3. After long-term use, the polytetrafluoroethylene in the high-speed disperser tool is a vulnerable part for the user to replace.4. After each work, remove the tool and rinse with water to dry.

• Efficient: The inner blade of this homogenizer adopts a high-speed internal suction homogenization structure, which can be used for homogenization, emulsification, and extraction of trace organic compounds, lipid solutes, and soluble organic solvents between two immiscible liquids, and can achieve uniform mixing.
• Adjustable Speed: This high-speed homogenizer has a mixing capacity of 5-1000ml and a rotation speed of 8000-22000 revolutions per minute. It can break the cell membrane at a speed of up to 22000 RPM and separate and split DNA strands into small molecules at different speeds. Can be used as a low-speed mixer.
• Digital Display: The instrument adopts a high-speed thyristor control system, and the Hall element speed measurement adopts advanced electronic circuits. The digital display is clear and easy to use.
• Complete Accessories: This homogenizer is equipped with 1212G: diameter 12mm, length 120mm; 1218G: diameter 18mm, length 120mm, two working heads can meet different homogenization requirements.
• Notes: The instrument should be placed on a horizontal workbench, and the required homogenizing tools must be installed in place. When connecting the power to test the machine, first use a cup or vessel filled with water to submerge the plum blossom blade in the water. Turn on the power switch, slowly adjust the speed knob to fast, and there should be no obvious metal friction sound (if there is a metal friction sound, turn off the power, loosen the 6M/M support screw of the tool, randomly turn the outer fixing sleeve upwards and install it in place, and then tighten it) before it can work.